PRODUCT CENTER
Melting Materials Dripping Test Machine,NF P92-505、EU 95/28/EC、ECE R118 Annex 7
FTech-NFP92-505
- Product Introduction
Description
This tester meet international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test isadditionaltest for M-class building materials. It is suitable for hot melt material effect in the primary heat source to evaluate the performanceof drippingand burning performance testing. Flexible and thin materials can be tested;
Model:FTech-NFP92-505
Standards:
NF P92-505
EU 95/28/EC
ECE R118 Annex 7
Features:
1, All fixtures are made of stainless steel material, appearance nice and corrosion resistance;
2, Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;
3, Sample installation height can be adjusted;
4, The radiation heat of the radiator is 30KW/m2, up to 100KW/m2.
5.Output power of electric radiator: 500W .
6. The radiant heat radiator can be adjusted linear through the power control automatic adjustment;
7.The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm.
8.The heat radiation reachto to3W / cm³ the position 30mm from the radiation shield plane.
9. Sample holder ring is made of stainless steel and the inner diameter is 118mm.
10.Take off the plate inner diameter is 118mm, depth 12mm,internalplug of cotton.
11.Radiation cone can move up and down.
12.Automatic timing warning of sample ignition.
13.OPTION for ECE-R118：MEDTHERM Heat flux transducer inported from the USA
Specification:
1、Dimension: 1000*500*800mm
2、Weight：50kg
This tester meet international standards NF P92-505, EU 95/28 / EC, ECE technical specifications and requirements of R118 Annex 7 of these Regulations. According to NF P 92-505 request, the test isadditionaltest for M-class building materials. It is suitable for hot melt material effect in the primary heat source to evaluate the performanceof drippingand burning performance testing. Flexible and thin materials can be tested;
Model:FTech-NFP92-505
Standards:
NF P92-505
EU 95/28/EC
ECE R118 Annex 7
Features:
1, All fixtures are made of stainless steel material, appearance nice and corrosion resistance;
2, Radiation bracket can be rotated, the rotation angle is greater than 90 degrees and easy to install the sample;
3, Sample installation height can be adjusted;
4, The radiation heat of the radiator is 30KW/m2, up to 100KW/m2.
5.Output power of electric radiator: 500W .
6. The radiant heat radiator can be adjusted linear through the power control automatic adjustment;
7.The radiation shield is a quartz glass and the opening diameter is 100mm ± 5mm.
8.The heat radiation reachto to3W / cm³ the position 30mm from the radiation shield plane.
9. Sample holder ring is made of stainless steel and the inner diameter is 118mm.
10.Take off the plate inner diameter is 118mm, depth 12mm,internalplug of cotton.
11.Radiation cone can move up and down.
12.Automatic timing warning of sample ignition.
13.OPTION for ECE-R118：MEDTHERM Heat flux transducer inported from the USA
Specification:
1、Dimension: 1000*500*800mm
2、Weight：50kg
Related Products
-
Cone Calorimeter Heat Release Test Machine, ISO 5660 FTech-ISO5660A -
Nbs Smoke Density Chamber, ASTM E662, ISO 5659 FTech-ISO5659 -
Flooring Radiant Panel Test Apparatus, En ISO 9239-1, ASTM E648 FTech-ISO9239-1 -
Wire Fire Resistance Test Machine, IEC 60331 FTech-IEC60331A -
UL94 Horizontal/ Vertical Flame Test Machine FTech-UL94 -
Limited Oxyen Index Tester FTech-ASTM D2863A -
Halogen Acid Gas Content Testing Machine, IEC 60754、 GB/T 17650 FTech-IEC60754 -
Bunched Cable Vertical Flame Spread Test Machine GB/T 18380.3、IEC 60332-3-10 FTech-IEC60332-3 -
Building Material Non-Combustibility Test Machine, ASTM E2652, En ISO 1182 FTech-ISO1182 -
En ISO 11925-2 Single-Flame Source Tester FTech-ISO11925-2 -
Bomb Calorimeter, En ISO 1716 FTech-ISO 1716 -
Smoke Density Test Apparatus, En 50268, IEC 61034 FTech-IEC61034 -
Mining Cable Flame Resistant Apparatus, Mt386-2011 FTech-MT386 -
Vertical/Horizontal Wire Flame Test Apparatus, UL1581、ASTM D 5025、ASTM D 5207 FTech-UL1581 -
Vertical Tray Fire Test Apparatus, UL1685、IEEE 1202 FTech-UL1685 -
Textiles 45 Degrees Damaged Area Experimental Test Machine ASTM D 1230、NFPA 702 FTech- ASTMD1230-T -
Textiles Flame Propagation Test Machine (NFPA701 Test Method 2) FTech-NFPA701-2 -
Full Face Masks Flame Resistance Test Machine, En136 FTech-GA124T -
Full Face Thermal Radiation Resistance Test Machine, En 136 FTech-EN136 -
(Protective clothing) Protection Against Radiant Heat Test Machine, En 366 FTech-ISO6942 -
(TPP)Thermal protective performance Tester ISO 17492 FTech-ISO 17492 -
Vertical Flammability Testing Equipment CFR 1615/1616 FTech-CFR1615 -
Curtain Flame Propagation Test Machine, Nfpa 701 FTech-NFPA701-1 -
Fabric Vertical Flame Spread Test Machine, ISO 6941 FTech-ISO6941 -
Sleeping Bags Flammability Test Machine, ASTM F1955 FTech-ASTM1955 -
Blanket Flammability Test Machine, ASTM D4151 FTech-ASTM4151 -
Smoke Density Test Machine for Building Material, ASTM D2843 FTech-ASTMD2843 -
Room Corner Test Machine, ISO 9705, En 14390 FTech-ISO9705 -
Solar Cell Spread of Flame & Burning Brand Test Machine, UL 1730 FTech-UL790 -
Vertical Fire Testing Furnace En1363-1, ISO 834 FTech-EN1363V -
Fire Resistance Horizontal Test Furnace, En1363-1, ISO 834 FTech-EN1363H -
Melting Materials Dripping Test Machine,NF P92-505、EU 95/28/EC、ECE R118 Annex 7 FTech-NFP92-505 -
Fire Resistance Valve, Hose & Pipe Test Machine, ISO 10497 FTech-ISO19922 -
Spread of Flame Test Apparatus,ISO 5658-2 FTech-ISO5658-2 -
Radiant Panel Flame Spread Apparatus, ASTM E162 FTech-ASTM162 -
Fire Propagation Test Machine, BS 476-6 FTech-BS476-6 -
SBI Single Burning Item, En 13823 FTech-EN13823 -
Mouse Test Machine for Noxious Gas Analysis, DIN53436 FTech-DIN53436 -
Nes 713 Toxicity Test Apparatus TTech-NES713 -
Big Combustion Chamber, DIN 54837 FTech-DIN54837 -
Thermal Radiation Dripping Test Machine, NF P92-501 FTech-NFP92-501 -
Motor Accessories Combustion Testing Machine, Fmvss 302 FTech-ISO3795 -
Smoke Pollution Control System FTech-ass1 -
Limited Oxyen Index，ASTM D 2863, ISO 4589 FTech-ASTM D2863B -
Limited Oxyen Index Tester，ASTM D 2863, ISO 4589 FTech-ASTM D2863C -
Tag Closed Cup Auto Flash Point Analyser, ASTM D 56 FTech- ASTM D 56 -
Cleveland Open Cup Auto Flash Point Analyser, ISO2592 FTech-ISO 2592 -
Flame Durability Testing Machine, ISO 9038 FTech-ISO 9038 -
Needle Flame Test Machine, IEC60695-2-2 FTech - IEC60695 -
Glow Wire Test Machine, IEC 60695-2-10 FTech- 60695-2-10 -
Foam Plastic Horizontal Burning Test Machine, ISO 9772 FTech- ISO 9772 -
Textiles 45 Degrees Damaged Area Experimental Test Machine FTech- ASTMD1230-T -
Flame Propagation Test Apparatus for a Single Insulated Cable, IEC 60332-1 FTech-IEC60332 -
45 Degrees Determination Test Machine of Flame Spread Rate FTech- NFPA 702 -
The Minimum Ignition Temperature Testing Machine, IEC 61241 FTech- IEC 61241 -
Anti Igniting Test Machine for Mattress and Sofa, En1021-1. -2, ISO 8191-1. -2 FTech- ISO8191 -
Large Furniture Calorimeter FTech-GA111 -
Carpet Flammability Test Machine, ISO 6925、CFR 1630/1631、BS 6307、BS 4790 FTech- ISO 6925 -
Temperature Oxygen Index Apparatus, ISO4589-3, Nes 715 FTech-ISO4589-3 -
Protective Clothing Flame Spread Test Machine, BS En ISO 15025 FTech- ISO15025 -
Tracking indices of solid insulating materials Test Machine ,IEC60112 FTech-IEC60112 -
Hard Casing Flame Retardant Performance Test Machine - Intelligent FTech-JG3050A -
Hard Casing Retardant Performance Test Machine FTech-JG3050B -
ASTM C411,ISO 8142 Thermal Insulation Materials Maximum Use Temperature Test Machine FTech-ISO 8142 -
Flammabillity Test Machine,BSS 7230 ,FAA.FAR.25.853 FTech-BSS 7230 -
Multifunctional Fabric Vertical Combustion Test Machine, ISO 6940 FTech-ISO6940-M -
Melt Mass-Flow Rate Test Machine, ASTM D1238-98 FTech-ISO1133 -
Protective Clothing Contact Heat Transmission Test Machine, ISO 12127 FTech-ISO12127-1 -
Heat Transmission Test Machine for Protective Clothing ISO9151，EN367 FTech-EN367 -
Alcohol Burner Combustion Testing Machine, Mt182 FTech-MT182 -
Wire Fire Resistance+ Mechanical Shock Testing Machine, IEC 60331 FTech-IEC60331B -
Cable Fire Resistance& impact& water spray Tester Machine,BS 6387 FTech-BS 6387 -
Steiner Tunnel Chamber UL910,NFPA262,ASTM E84,UL723 FTech-UL910 -
Cigarette Ignition Resistance Tester,CAL TB 117 Ftech-CAL TB 117 -
Electrical burner test machine ,NFP 92-503 FTech-NFP92-503 -
Vertical Flammability Testing Equipment,ASTMD6413 FTech-ASTMD6413 -
Small Splashes of Molten Metal Testing Machine，ISO 9150，EN348 FTech-EN348 -
Flame Spread Test Machine, BS 476 part 7 FTech-BS476-7 -
Vertical Burning Rate Tester,ECE R118 ANNEX 8 FTech-ECE R118-8 -
Fabric Electromagnetic Shielding Tester FTech-913G -
Medical Face Mask Fire Resistance Test Machine FTech-GB19083 -
Building products ignitability Apparatus,ISO 5657 FTech-ISO 5657 -
Direcct Flame Impingement Test Machine, BS 476-12 Ftech-BS 476-12 -
Building Material Radiant Panel Test Machine，AS/NZS 1530.3 FTech-AS1530.3 -
PV Module Flame Test Equipment,UL 1703,UL 790,IEC 61730 FTech-IEC 61730-2 -
Photovoltaic Flammability Test Apparatus,ISO 11925-2：2010,IEC61730-2 FTech-IEC61730-2F -
Resistance to flame propagation tester,ECE R118 Annex 10 FTech-ECE R118-10 -
Mask Bacterial Filtration Efficiency Test Machine (BFE) FTech-0469 -
Flammability Tester,16 CFR PART 1610 FTech-CFR 1610 -
Resistance of Materials to Molten Metal Splash, ISO 9185 Ftech- ISO 9185 -
AS1530.2 Test for Flammability of Materials FTech-AS1530.2 -
Single Burning Item (SBI),En 13823 FTech-EN13823 -
Burning Behaviour of Bunched Cables,EN 50399 FTechEN 50399 -
Room Corner Test ISO 9705, EN 14390; ASTM D5424; ASTM D5537; ASTM E603; ASTM E1537; ASTM E1590; ASTM E1822; NFPA 265; UL 1685; NT FIRE 25; NT FIRE 32 FTech-ISO 9705 -
Smoke Density Chamber (Horizontal Test): Conical Radiator Furnace FTech-ISO5659 -
3 Metre Cube Smoke Density Apparatus IEC 61034; BS 6853; BS 6724; BS 7622 FTech-IEC 61034 -
Density of Smoke from the Burning or Decomposition of Plastics ASTM D2843 FTech-ASTMD2843 -
Flame Propagation Test for a Single Insulated Cable IEC / EN 60332-1-2 FTech-IEC 60332-1-2 -
LIFT, IMO Spread of Flame Apparatus ISO 5658-2; IMO Resolution A.653(16); ASTM E1317; ASTM E1321 FTech-ISO 5658-2 -
Radiant Panel Flame Spread Apparatus ASTM E162; ASTM D3675 FTech-ASTM 162 -
Single-Flame Source Test (Ignitability Apparatus) EN ISO 11925-2 FTech-ISO11925-2 -
Non-Combustibility Apparatus EN ISO 1182; IMO FTPC Part 1; ASTM E2652 FTech-ISO 1182 -
Oxygen Index ASTM D2863; BS ISO 4589-2; NES 714 FTech-ISO 4589-2 -
Horizontal/Vertical Flame Chamber UL 94 Chamber FTech-UL 94 -
Vertical/Horizontal Wire Flame Test Apparatus UL 1581 FTech-UL 1581 -
Motor Accessories Combustion Chamber,FMVSS 302; ISO 3795; ASTM D5132-04 FTech-FMVSS 302 -
FTIR Toxicity Test ISO 19702; ISO 9705; EN 45545-2 FTech-FTIR -
Corrosion Test Apparatus IEC 60754 Part 1 & 2 FTech-IEC 60754 -
Toxicity Test Apparatus NES 713 FTech-NES713 -
Circuit Integrity Under Fire Conditions Apparatus BS 6387 FTech-BS 6387 -
Horizontal Fire Resistance Test Furnace BS 476 (20-24); BS EN 1363 (1-2); BS EN 1364 (2); BS EN 1365 (2-4); BS EN 1366 (1-3); ASTM E119; ASTM E814; AS FTech-EN 1363H -
Large Scale Vertical Fire Resistance Test Furnace BS 476 (20-23) FTech-EN 1363V -
Burning Behaviour of Bunched Cables EN 50399 FTech-EN 50399 -
MANIKIN FLAME ENGULFMENT TEST APPARATUS,ISO13506-1,ASTM F1930 FTech-ISO13506 -
Contact heat transmission test machine,ISO 12127-2 FTech-ISO12127-2 -
BAM Fall Hammer Apparatus,EN 13631-4 -
Toys Flammability Tester,EN71-2 FTech-EN71-2 -
INTERMEDIATE SCALE INDICATIVE FIRE RESISTANCE TEST FURNACE EN 1363-1 , ISO 834 FTech-EN1363V
